Feeling Frisky? Adaptive Technologies Group has a new website. Check it Out Here
For those who prefer the old site, it will still be available for browsing at the same domain.

 

PoleStar®/ Marine

All-Weather Pole and Column Mounting System


Placeholder

Overview

This family of all-weather, load rated components provides a round strong foundation for mounting and aiming loudspeakers to poles and columns, both indoors and outdoors. The Polestar system is comprised of five components: a stainless steel support arm, pole adapters, a dual adapter and a choice of band kits and a safety anchor. Everything needed at the job site is available from stock. Starting with the popular load rated pole adapters, the following describes all the components that are available to complete your loudspeaker installation. For square poles see SAS-200-24-G.

INSTALLERS TAKE NOTE: Always secure mounted objects to the mounting structure with safety cables.

  • Thumbnails
  • Thumbnails
  • Thumbnails
  • Thumbnails
  • Thumbnails




Standard Features

  • Mounts to round surfaces including poles and columns
  • All stainless steel construction
  • Load rated components
  • Components use common hole patterns
  • Cosmetic trim components included
  • Job-site ready

Specifications

Material: Structural Steel Alloy
Finish: Natural, Passivated

Type of Loudspeaker Installation

     

Single Loudspeaker Installation
For 2/3/8"-6" Poles & Larger

This type of installation assumes that the selected loudspeaker come with its own yoke style mounting arm. The installation then further requires a Support Arm, a Pole Adapter and a Band Kit. Each of these components is constructed of stainless steel material and come with the required assembly hardware. If a yoke arm is not supplied with the selected loudspeaker.

     

Dual Loudspeaker Installation
For 6" diameter poles & Larger

This type of installation assumes that the pole is 6” in diameter or larger and the speakers come with their own yoke style mounting arms. This installation requires a dual adapter arm, the larger pole adapter and a band kit. When an adequate anchor point is not available, include the safety anchor. Each of these components are allweather rated and come with the required assembly hardware. If a yoke arm is not supplied with the selected loudspeakers.

     

Three Loudspeaker Installation
For 6" Diameter Poles & Larger

This type of installation assumes that the pole diameter is a 6” or larger and that the selected loudspeakers come with their own yoke style mounting arms. This installation requires a support arm, a dual adapter arm, the larger pole adapter and a band kit. When an adequate anchor point is not available, include the safety anchor. Each of these components are all-weather rated and come with the required assembly hardware. If a yoke arm is not supplied with the selected loudspeakers.

Pole Adapters

PM-MOUNT-6-DOWN
2-3/8"-6" Diameter & Larger

Designed for 6”/154mm down to 2- 3/8” diameter poles and columns. This all-stainless mount with natural finish supports up to 150 lb./68 Kg, in a vertical load with a 5:1 design factor. It accommodates the PM Series Support Arm and comes with hardware to mount the support arm to the pole adapter. There are four standard permanent band kits available in different lengths and are sold seperately. Custom lengths are also available.

WEIGHT: 3 LB./1.4 KG

FOR ROUND POLES ONLY

PM-MOUNT-6-UP
6" Diameter Poles & Larger

For 6”/154mm diameter and larger poles and columns, use the PM-Mount-6UP. This all-stainless adapter offers a natural finish and supports up to 300 lb./68 Kg, in a vertical load with a 5:1 design factor. It accommodates the PM Series Support Arm, Dual Adapter and includes hardware for their attachment. There are four standard permanent band kits available in different lengths and are sold separately. Custom lengths are also available.

WEIGHT: 8 LB./3.6 KG

FOR SQUARE POLES SEE SAS-200-24-G

Band Strap Kits

Four different length permanent band kits are available for the PM-Mount- 6UP and - 6DOWN. Standard stock lengths include 20”, 30” and 90”. Choose from the PM-Band-20, PMBand-30, PM-Band-60 and PM-Band-90. Each kit contains 2 stainless steel bands in the length specified and two clamp assemblies. These kits, when used per instructions will support the stated working load of the selected pole adapter.

 

Model Width Width Max Dia. WLL* Weight
PM-Band-20S 20”/50.8cm .50/13mm 6”/152mm 150 / 68kg .7 lb. /.32 kg
PM-Band-30 30”/76.2cm .75/19mm 6”/152mm 300 / 136kg 1.5 lb. /0.7 kg
PM-Band-90 90”/228.6mm .75/19mm 25”/635mm 300 / 136kg 2.5 lb. /1.1 kg

For Pole Diameters over 25” contact customer service
WLL = Working Load Limit

Support Arm / PM-SA-24

The PM Series Support Arm. is produced from rugged structural stainless steel in a natural finish and supports the stated working load of the selected pole adapter. Three different mounting holes allow for placement, relative to the pole to allow clearance for tilt rotation. Decorative hole covers provide a finished look and hardware is included to secure Yoke and U-Bracket style mounts.

 

Dual Adapter / PM-DA-48

The Dual Adapter is an innovative way to mount and aim two loudspeakers and other objects (of equal weight and mass) from the same Pole or column. A variety of available mounting holes permit speakers to be installed closer or further from the pole to provide clearance for different down tilt angles. The Dual Adapter is produced from stainless steel in a natural finish and supports up to the stated maximum working load of the pole adapter . Decorative end caps provide a finished look and hardware is included to secure it to the pole adapter and/or support arm. Yokes and U-Brackets are not included.

 

Safety Anchor / PM-Safety-6Down

When the pole or column does not offer an adequate way to attach safety cables, specify the PM-Safety-6Down and corresponding band kit. This mount provides a structural method for anchoring safety cables. It installs above the pole adapter and safety cables are then secured to the safety anchor and each loudspeaker, thus by-passing the pole adapter completely.

 

BAND KITS SOLD SEPARATELY



Adaptive Technologies Group
1635 E. Burnett Street | Signal Hill, CA 90755 USA
Ph: 562.424.1100 | Fax: 562.424.3520
www.adapttechgroup.com

Adaptive Technolgies Group Logo

Always install Safety Cables
Warning: Mounting and/or suspension loudspeakers requires experienced professionals. Improperly installed loudspeakers can result in property damage, personal injury and/or liability to the installing contractor.