Feeling Frisky? Adaptive Technologies Group has a new website. Check it Out Here
For those who prefer the old site, it will still be available for browsing at the same domain.

 

SAS-1WA-40

Suspension and Aiming for Single Cabinets


Placeholder

Overview

Save time and reduce clutter. The One-Way-Array™ is an easy use load-rated and off-the-shelf loudspeaker rigging and aiming system for single loudspeakers. It is ideal for aiming sound for left and right of house configurations and provides side & back fill coverage where speakers cannot be wall mounted.

The top section of the One-Way-Array rigs from two overhead suspension points such as along a beam. The lower section supports the loudspeaker but rotates relative to the upper section, up to 360° horizontally. This gives the installer precise horizontal aiming of the loudspeaker.

For precise vertical tilting, select from a variety of U-Brackets or Steerables® Adjustable Tilt Cable Kit systems. Load rated shackles and wire ropes are included in these kits.

  • Thumbnails


Standard Features

  •  

Specifications

Material: Alloy structural steel tube powder
Finish: coat paint
Color: Black
WLL: 300 lbs/136 Kg
Design Factor: 10:1 ratio
Pack Count: 1/carton
 
* Includes eyebolts & hardware kit

Dimensions

 


 



ONE-WAY-ARRAY
WITH STEERABLES TILT CABLE KIT
VERTICAL ORIENTATION

One-Way-Array’s standard configuration comes with eyebolts that secure to the upper and lower rotating arms. The entire assembly suspends from the upper eyebolts and the Steerables Tilt Cable Kit attaches to the lower eyebolts. Cable kits come in five different lengths to accommodate different down angles. The selected loudspeaker suspends from the cable kit and can be adjusted into any down angle.

 

ONE-WAY-ARRAY
WITH U-BRACKET
HORIZONTAL ORIENTATION

One-Way-Array’s standard configuration comes with pre set holes in the lower rotating arm to accommodate standard Adaptive U-Brackets. To install, simply remove the center bolt, attach the selected U-Bracket using included hardware then reassemble the center bolt. Attach the loudspeaker in between the U-Bracket and tilt into position.

 
     

Optional Acessories

  • 1. Steerables Tilt Cable Kit for tilt angle control
  • 2. Fixed width U-Brackets for tilt angle control
  • 3. Beam Clamps, Swivel Rings and rigging chain available to create hanging points
  • 4. Eyebolts, Shackles and Turnbuckles available for complete install
  • 5. Wire Rope components and supplies


Adaptive Technologies Group
1635 E. Burnett Street | Signal Hill, CA 90755 USA
Ph: 562.424.1100 | Fax: 562.424.3520
www.adapttechgroup.com

Adaptive Technolgies Group Logo

Always install Safety Cables
Warning: Mounting and/or suspension loudspeakers requires experienced professionals. Improperly installed loudspeakers can result in property damage, personal injury and/or liability to the installing contractor.