Feeling Frisky? Adaptive Technologies Group has a new website. Check it Out Here
For those who prefer the old site, it will still be available for browsing at the same domain.

 

SB-30

Suspension & Aiming for Single Cabinets


Placeholder

Overview

The SwivelBeam is an easy to use load-rated and off the shelf loudspeaker rigging and aiming system from single loudspeakers to full line arrays. It is ideal for aiming sound in left and right of house configurations and provides side and backfills where speakers cannot be wall mounted. The upper cross arm of the SwivelBeam rigs from two overhead suspension points. The lower cross arm supports the loudspeaker and rotates relative to the upper section, horizontally, up to 360°.

This gives the installer precise horizontal aiming of sound. For precise vertical aiming, a self-contained cabinet located behind the lower cross arm. Typical venues include theatres, churches, school auditoriums, gymnasiums, sport arenas, meeting halls and theme park attractions.

  • Thumbnails

Standard Features

  • Central pivot for steering
  • Rear pull back point for tilting
  • Rugged Steel Construction
  • Powder Coat Finish

Specifications

Package Contents

Material: Alloy Structural Steel Tube 1 pc Swivel Beam
Finish: Powder Coat Paint
Color: Black
WLL: 545 lb / 248 Kg
Design Factor: 7:1
Pack Count: 1/carton

Dimensions

Optional Acessories

  • Wire Rope Supplies
  • Eyebolts, Shackles, Turnbuckles
  • Beam Clamps, Swivel Rings, Truss Clamps

Swivel Beams


SWIVEL BEAM - USING
SINGLE TILT CABLE KIT ASSEMBLY

Fly medium to large speaker cabinets in a vertical orientation using narrow model SwivelBeams as a load-rated suspension and steering device. The SwivelBeam’s upper arm provides all the suspension strength from two points that secure to any overhead structural member such as an I-Beam while the lower arm rotates horizontally to aim the speaker into the desired direction. A third attach point on the lower arm provides a way to tilt the speaker downward and into the desired angle.


SWIVEL BEAM - USING
DOUBLE TILT CABLE KIT ASSEMBLY

Fly medium to large speaker cabinets in the horizontal orientation using wider model SwivelBeams as a load-rated suspension and steering device. The SwivelBeam’s upper arm provides all the suspension strength from two points that secure to any overhead structural member such as an I-Beam while the lower arm rotates horizontally to aim the speaker into the desired direction. A third and fourth attach point on the lower arm provides a way to tilt the speaker downward and into the desired angle.


SWIVEL BEAM - USING
WIRE ROPE TO FLY LINE ARRAYS

Fly medium size line arrays using wider model SwivelBeams as a load-rated suspension and steering device. The SwivelBeam’s upper arm provides all the suspension strength from two points that secure to any overhead structural member such as an I-Beam while the lower arm rotates horizontally to aim the line array into the desired direction. A third attach point on the lower arm provides a pull back to tilt the line array into the desired down-angle.



Adaptive Technologies Group
1635 E. Burnett Street | Signal Hill, CA 90755 USA
Ph: 562.424.1100 | Fax: 562.424.3520
www.adapttechgroup.com

Adaptive Technolgies Group Logo

Always install Safety Cables
Warning: Mounting and/or suspension loudspeakers requires experienced professionals. Improperly installed loudspeakers can result in property damage, personal injury and/or liability to the installing contractor.