WP-16


image

STUD ADAPTER - FOR WOOD AND METAL WALL STUDS WP-SERIES



image

Wall Stud Adapter on 16” centers


The wall stud adapter plate is used to bridge two structural studs offering a secure surface mounting for specific Allen Products mounting designs including SocketMount, Steerables Wall Mount, Multimount 120 and more. It bridges both standard 16” wood and metal construction wall stud spacing.


The wall stud adapter plate is made from rugged alloy steel with two horizontal flanges for added rigidity. The assembly is finished with a baked-on powder coat paint.


The WP-16 may be mounted over dry wall, plaster and other wall materials, as long as it is anchored into the structure. It can even be embedded underneath the wall material for a clean appearance.



image

image

SPECIFICATIONS:

Material: Structural steel alloy

Finish: Powder Coat Color: Black texture Pack count: 1 unit/carton

Load rating: Meets the specifications of selected mount


Adapts to the following Allen designs:


DIMENSIONS:


PACKAGE CONTENTS:

1 pc. Wall stud adapter plate

3 pcs. 3/8” Flat washers

3 pcs. 3/8-16 Flange nut


Hardware for mounting to the wall structure is not included.

image


image

image

image

Front View Side View


image


image

image

ALWAYS INSTALL SAFETY CABLES

WARNING: Mounting and/or suspension loudspeakers requires experi- enced professionals. Improperly installed loudspeakers can result in prop- erty damage, personal injury and/or liability to the installing contractor.

ALWAYS INSTALL SAFETY CABLES

WARNING: Mounting and/or suspension loudspeakers requires experi- enced professionals. Improperly installed loudspeakers can result in prop- erty damage, personal injury and/or liability to the installing contractor.

Adaptive Technologies Group

1635 E. Burnett Street | Signal Hill, CA 90755 USA Ph: 562.424.1100 | Fax: 562.424.3520

www.adapttechgroup.com